Repro 44IDF carb
$275 - Reproduction 44IDF carb
Repro 44IDF carb
Brand new reproduction (not genuine European Weber) 44IDF down draught carb - with chrome ram tubes and fitting kits!
Purchase price includes basic re-jet to suit your application! Change of chokes size or emulsion tubes is small additional cost.
The 44IDF Weber carb is a compact design synchronous carb sold to suit many performance applications. It features ball bearing throttle shafts for smooth operation, and fully adjustable idle and main circuits, so you can have economical cruising, whilst still being able to get ideal mixtures for maximum power under full throttle. The IDF carbs are hard to beat for bang for your buck. Instead of us giving a full description here, just google 44IDF and you'll find more info than you will have time to read.
Brand new in box - includes -
- Repro 44IDF carburetor
- generic throttle linkage
- mounting studs and hardware for air cleaner or ram tube/air horn fitment
- pair of 57mm chrome air horns
55 idle jets
Ball bearing throttle shaft bearings
Full manifold vac ports
57mm tall chrome air horns
We spec all of our DCOE and IDF carbs with adjustable idle air bleeds to help balance twin and quad carb setups.
We also spec all of our carbs with full manifold vac ports, so if you want a run a full manifold vacuum system for brake booster or ignition vacuum advance, and were going to drill and tap each manifold runner to install a fitting, you don't need to because each barrel of each carb has a vacuum port that you can use. And we have the small hose tails fittings available too to connect your vac lines to.
We
can supply single, twin or quad IDF intake manifolds for most engines including
linkage kits and gasket kits.
We have setup lots of these IDF carbs for customers, ranging from single carb installs, to quad carbs on small block Chev V8's. We only use FAJS brand carbs, as these have proven to be a quality carb, identical in performance and tuning to genuine Weber brand carbs. There are now lots of Weber IDF copies on the market, and the very cheapest carbs do appear to be lower in quality.
To make a purchase, of if you have any questions, just send us an email sales@turboescort.com and we'll reply ASAP.
Repro 44IDF = $275
Email us to order.
Purchase price includes basic re-jet to suit your application (mains, air correctors or idle jets). Change of chokes, acc pump jets/bleeds, auxiliary venturi size or emulsion tubes is an additional cost.
As with any carb swap, we can only take an educated guess at the jet sizes your engine will need, so even though the carbs should run quite well out of the box, once fitted to your engine, fine tuning will be needed to optimise power and economy. We can also supply optional jetting packs of 4 x jets for $20 (either mains, air correctors or idle jets), so you can have the jets handy when you do your fine tuning.
Repro 44IDF in twin carb configuration